ADS: Using Equations and User Defined Functions in ADS

Published on 5, Apr

In this appnote, we will look at different ways of using equations in ADS: simple equations “on the fly” in the ADS data display and user defined functions that you can use in data display or optimization for target definitions. We will also discuss the re-use of custom equations/functions. All these concepts are shown with […]

ADS: Miniaturized Bandpass Filter (AEL layout example)

Published on 30, Mar

In this application note, AEL programming is applied to create a fully scalable layout of to the miniaturized band pass filter by Sheng Zhang et al, published in Microwave Journal March 2017 Miniaturized Bandpass Filter Using Quarter SIW Resonator With Elliptic Defected Structure This fully parametric layout cell can then be used in ADS for […]

ADS Momentum: SMD Port Calibration

Published on 13, Mar

This application note is a simplified version of an earlier global-ground-or-differential-ground appnote, with a special focus on SMD port calibration in ADS Momentum, and how to use it properly. ADS Momentum: SMD Port Calibration

Inductor Toolkit: GPDK demo now compatible with ADS 2016

Published on 2, Jan

The Inductor Toolkit GPDK demo was updated for compatibility with ADS 2016 HF1

ADS: Create customized artwork cells using AEL code

Published on 30, Nov

In this application note, we will look at the basics of AEL programming for customized layout (“artwork”) and how to include that in your ADS project.  ADS: Create customized artwork cells using AEL code

ADS: Using layout parameters in Momentum EM simulations

Published on 13, Nov

In this application note, we will look at two different ways of using layout parameters for Momentum EM simulations: Use built-in parameters in layout created from standard circuit elements (microstrip line etc.) Parameterize manually drawn layout from rectangles/polygons We will discuss the use EM results of parameterized blocks in a schematic, with emSetup/emModel views. A […]

Inductor Toolkit now compatible with ADS2015.01

Published on 30, Jan

Muehlhaus Inductor Toolkit for ADS assists you to synthesize the best possible RFIC inductor layout. The software has now been updated to support ADS2015.01. The free version for GPDK180 technology (fully functional until 30 June 2015) can be found here: Free Demo: RFIC Inductor Synthesis for GPDK180

Microwave Office: PCB antenna simulation 868MHz

Published on 23, Jan

In part one of this application note we had discussed basic design concepts and simulation methods for “printed” PCB antennas. Now in this second part, we will discuss advanced topics: Co-simulation of antenna and SMD matching components for electrically small antennas Using the Analyst 3D FEM solver to include the effect of finite PCB size, […]

Microwave Office: PCB antenna simulation 2.4GHz/5.6GHz

Published on 16, Jan

This document describes the design and simulation of simple PCB antennas for 2.4GHz and 5.6GHz with Microwave Office and the Axiem EM simulator. The first example shows a 2.4GHz single band antenna. The second example then shows a dual band version for 2.4GHz and 5.6GHz. Finally, we will investigate the sensitivity to PCB material tolerances. […]

ADS Inductor Toolkit: Special discounts until 31 Dec 2014

Published on 15, Nov

From 1. November 2014 until 31. Dezember 2014 we offer Inductor Toolkit with a tremendous discount. For details and prices, please see the attached product flyer. RFIC_Inductor_Toolkit_generic_datasheet For more information on Inductor Toolkit, please visit the product page. An evaluation version for GPDK 180nm is available here.